Ideal for use in infrastructure, horticulture and in agricultural systems, the Davant compression fit coupler with 25mm ends can be employed in the connection of water mains pipes to water supply pipes. Made of virgin polypropylene (PP) for its good resistance to impacts and stress, and its UV and frost resistance, this coupler is suitable for connecting MDPE to MDPE irrigation pipes if used with a pipe liner. Suitable for outdoor use, 7010 fittings are supplied with a captive O-ring, ensuring a reliably watertight seal when the grip is tightened after attaching to a pipe.
Product features
-
Compact, attractive plumbing fitting
-
Push to fit on all pipes
-
Adapters from PE to copper
-
Instant seal even at low or negative pressures
-
Full end load performance
-
Tamper-resistant design
-
WRAS approved to 16 bar
-
Meets AS/NZS 4129, AS 1722 and BS 21
-
Meets DIN 2999/8076, ISO 7/1 and ISO 17885
-
Meets NEN 3258 and UNI 9561
Description
Ideal for use in infrastructure, horticulture and in agricultural systems, the Davant compression fit coupler with 25mm ends can be employed in the connection of water mains pipes to water supply pipes. Made of virgin polypropylene (PP) for its good resistance to impacts and stress, and its UV and frost resistance, this coupler is suitable for connecting MDPE to MDPE irrigation pipes if used with a pipe liner. Suitable for outdoor use, 7010 fittings are supplied with a captive O-ring, ensuring a reliably watertight seal when the grip is tightened after attaching to a pipe.
Product features
-
Compact, attractive plumbing fitting
-
Push to fit on all pipes
-
Adapters from PE to copper
-
Instant seal even at low or negative pressures
-
Full end load performance
-
Tamper-resistant design
-
WRAS approved to 16 bar
-
Meets AS/NZS 4129, AS 1722 and BS 21
-
Meets DIN 2999/8076, ISO 7/1 and ISO 17885
-
Meets NEN 3258 and UNI 9561
