Snug Mat FME 150Watt/m²
Description
The Snug FME mat is an easy installation solution, designed to produce a gentle even heat, and is ideal for use under carpet, laminate engineered wood. The mat is laid on top of our 3mm thick closed cell insulation. These two combined will raise your floor by only 4mm, making it the thinnest mat on the market for this type of installation. If you are planning on using a wood finish, the wood must be laid as a floating floor. Heater mats are available from 1-12m2 and are rated at 150 Watts/metre. When being installed under carpet we recommend that both the carpet and the underlay do not exceed a rating of 2 tog, and that an RCD is fitted by the electrical installer.
FME Foil Insulation Must Be Used In Conjunction With This Product
This Product Also Requires A Thermostat
Specification
Output: 150W/m
Voltage: 230V
Cable Thickness: 1.18-1.62mm
Max. temp output: +80°C
Min. temp output: -10°C
Min storage temp: -20°C
Min installation temp: -10°C
Cold lead cross section:
Until 4m²: 2 x 0.5mm²
5m² to 9m²: 2 x 0.75mm²
10m²: 2 x 1.0mm²
- FMEMAT2
- Snug
- 2.0 m²
- 4
- Mat
- Wood/Carpet
- 300W
- 0.5
Description
Snug Mat FME 150Watt/m²
Description
The Snug FME mat is an easy installation solution, designed to produce a gentle even heat, and is ideal for use under carpet, laminate engineered wood. The mat is laid on top of our 3mm thick closed cell insulation. These two combined will raise your floor by only 4mm, making it the thinnest mat on the market for this type of installation. If you are planning on using a wood finish, the wood must be laid as a floating floor. Heater mats are available from 1-12m2 and are rated at 150 Watts/metre. When being installed under carpet we recommend that both the carpet and the underlay do not exceed a rating of 2 tog, and that an RCD is fitted by the electrical installer.
FME Foil Insulation Must Be Used In Conjunction With This Product
This Product Also Requires A Thermostat
Specification
Output: 150W/m
Voltage: 230V
Cable Thickness: 1.18-1.62mm
Max. temp output: +80°C
Min. temp output: -10°C
Min storage temp: -20°C
Min installation temp: -10°C
Cold lead cross section:
Until 4m²: 2 x 0.5mm²
5m² to 9m²: 2 x 0.75mm²
10m²: 2 x 1.0mm²
Specifications
- FMEMAT2
- Snug
- 2.0 m²
- 4
- Mat
- Wood/Carpet
- 300W
- 0.5