End Feed Wall Plate Elbow - 15mm x ½"

End Feed - Wall Plate Elbow

End feed fittings are fittings that have a slightly larger diameter than there equivalent copper tube size. Unlike Solder Ring fittings which have an integral solder ring you need to add the solder yourself.

• Size: 15mm x 1/2"
• Material: Brass
• Wras Approved

Installation Tips

• Cut the tube with a tube cutter and not a hacksaw
• Ensure the ends of the tube are cut square
• De-burr the tube
• Clean the tube and fitting
• Use a suitable flux
• Assemble the joints
• Heat the joint quickly
• Add the solder