MDPE - Medium Density Polyethylene Pipe
Mdpe pipe is commonly used as the feed pipe to buildings laid underground before entering the premises.
Mdpe pipe has been tested to 12bar and is available in outside diameters of 20mm, 25mm, 32mm, 50mm 63mm sizes. This plain ended coil is suitable for use below ground on cold water services.
- Diameter: 50mm
- Length: 25m
- Colour: Blue
FEATURES
- Excellent pressure resistance, tested to 12 bar. Comfortably exceeds the performance requirements of UK Water Bye-laws Scheme. Tested and approved by various testing institutes worldwide.
- Wras approved.
- No need to dismantle the connector in order to fit the pipe.
- No time wasted just cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and its done!
- 115601
- Davant
- Blue
- 25
- 50
Description
MDPE - Medium Density Polyethylene Pipe
Mdpe pipe is commonly used as the feed pipe to buildings laid underground before entering the premises.
Mdpe pipe has been tested to 12bar and is available in outside diameters of 20mm, 25mm, 32mm, 50mm 63mm sizes. This plain ended coil is suitable for use below ground on cold water services.
- Diameter: 50mm
- Length: 25m
- Colour: Blue
FEATURES
- Excellent pressure resistance, tested to 12 bar. Comfortably exceeds the performance requirements of UK Water Bye-laws Scheme. Tested and approved by various testing institutes worldwide.
- Wras approved.
- No need to dismantle the connector in order to fit the pipe.
- No time wasted just cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and its done!
Specifications
- 115601
- Davant
- Blue
- 25
- 50